SierraDelta3D Boeing 737 Thrust Lever Addons for VelocityOne Flight Control

The only Thrust levers on the market with working buttons produced for VelocityOne. With this product, you will get a real Boeing 737 feeling and fly like a professional. You can connect this product directly to your PC or XBOX with a USB cable and use the 6 buttons actively.

All working buttons on the thrust levers:

- Left A/T Disangage
- Right A/T Disangage
- Left TO/GA
- Right TO/GA
- Left Thrust Reverse
- Right Thrust Reverse

This product, which is the best on the market, will give you the feeling of a real boeing 737 throttle quadrant with its own usb (works with a single usb) cable. The product is inspired by the Thrust levers on a real boeing 737 airplane.1:1 dimensions were used in the design of this product, which was produced with the support of pilots flying Boeing 737.

Full electronic thrust levers paired with the most realistic spring-loaded flap and speedbrake detent system ever designed for the Turtle Beach VelocityOne .

Speedbrake Set:

The speedbrake lever also features the lift system, which needs to be pulled up and out to arm the speedbrake, as in the real aircraft. It cannot access the speedbrake range without being pulled up and out first, to prevent inadvertent engagement.There are physical detents in the ''Armed'' and "Flight Detent" positions to simulate the resistance of the real lever to avoid unnoticed movements through them. Furthermore, the detents are designed so that moving the lever in the direction of retraction will not engage any of the detents. This is to replicate emergency maneuvers and operations to the highest degree, for example when executing a terrain escape maneuver. In this maneuver, the speedbrake is to be immediately moved to the fully retracted position, and then wiggled back and forth to verify that it has been locked in the retracted ''up'' position. The whole procedure can be fully replicated with the highest precision thanks to this design.

Flap Lever Set:

Equipped with a lift system, the flap lever operates by pulling it out and pushing it into the desired flap position. On the flap detent gate, there are stops at positions 1 and 15, mirroring those found in real aircraft. The gate stop at position 1 prevents premature retraction, maintaining control at lower speeds during emergency scenarios like single-engine Go-Around. Similarly, the gate stop at position 15 prevents inadvertent retraction during twin-engine Go-Around. Just like in real aircraft, deliberate engagement at these gate stops is necessary to proceed.

This product works in all flight simulators.

 - Microsoft Flight Simulator X
 - Microsoft Flight Simulator 2020
 - Prepar3D
 - X-Plane 11
 - X-Plane 12
 - etc.

 * Thrust Levers works in full compatibility with Turtle Beach VelocityOne. You can use Turtle Beach VelocityOne comfortably in all flight simulators you use. *

You can watch these videos to get more detailed information before purchasing the product.

- Installation Instructions and flight Video 
https://www.youtube.com/watch?v=SQektCsO6-s

I offered my products for sale with variations. According to the variation you have purchased, the following products will be shipped to you. 

- Speedbrake + Flap

1x Speed Brake Set
1x Flap Lever Set

 -L/R Thrust Lever (I have created such a variation for those who do not want to buy the Flap Lever set and speedbrake lever set.)

1x Left Thrust Lever
1x Right Thrust Lever

 -Full Set

1x Left Thrust Lever
1x Right Thrust Lever
1x Flap Lever Set
1x Speedbrake Lever Set

- Full Set + Fuel Cut Off Levers
1x Left Thrust Lever
1x Right Thrust Lever
1x Flap Lever Set
1x Speedbrake Lever Set
1x Fuel Cut Off Levers

* Plug and play *

This product is for the Turtle Beach VelocityOne Throttle Quadrant. So you need to have a Turtle Beach VelocityOne. This product does not include a throttle quadrant.